ORION® 930 (replaces the MMC205, MMC210, MMC220)

PRODUCT DESCRIPTION:

• Takes dual-depth measurements

• IntelliSense™ technology

• Settings for quick wood species selection

• Damage-free pinless sensor

• Virtually unaffected by temperature

• On-site calibration

• Relative humidity measurement mode

• Press to hold readings

• Programmable alarm

• 7-year warranty

• Rugged protective case and rigid carrying case

  The ORION® pinless moisture tester range continues the Wagner tradition of more than 50 years by offering reliable technology for measuring wood moisture without damaging the wood with pins, capable of measuring IN the wood and not ON the wood, in addition to being backed by Wagner's best 7-year industry warranty.

  The ORION® 930 DUAL DEPTH PINLESS pinless tester, dual-depth, was designed for professional wood floor installers/inspectors, quality control managers as well as joiners, wood craftsmen and meticulous manufacturers who demand accuracy, versatility and ruggedness from their indispensable moisture measuring devices.

  The Orion 930 tester has all the functions of the 910 and 920, and even more:

  Takes dual-depth measurements

  The ORION® 930 DUAL DEPTH PINLESS pinless wood moisture tester combines the deep and shallow readings of the 910 and 920 in a dual-depth mode. This mode offers readings at depths of 1/4" and 3/4" to measure the moisture content of a thin sample such as flooring wood or deeper for thick wood samples to find the moisture content deeper in the wood. In 1/4" mode, the tester measures the moisture content at the surface level to.25" (6mm). In 3/4" mode, the tester's IntelliSense™ technology is activated, the tester ignores surface moisture and takes the moisture content reading from 0.75" to 1.5" (38mm).

  IntelliSense™ technology

  The ORION® 930 DUAL DEPTH PINLESS pinless wood moisture tester encompasses IntelliSense™ technology in its 3/4" deep reading mode. This promotes adequate resolution of moisture content deep in the wood while minimizing the effects that surface moisture has on the tester's readings. Isolated-pin testers are able to avoid surface conditions, but they damage the wood surface every time readings are taken. Atmospheric humidity, condensation or other ambient conditions impact many moisture testers and give costly erroneous readings.

  Each ORION® 930 DUAL DEPTH PINLESS pinless wood moisture tester is supplied with:

  • 1 x ORION® 930 DUAL DEPTH PINLESS pinless wood moisture tester

• 1 x calibration block dedicated to your moisture tester with the same serial number

• 1 x rubber protective case

• 1 x ABS foam-lined plastic carrying case

• 1 x 9 volt battery

Dimensions with case: • Length: 5.75 inches (146mm)

• Width: 3.0 inches (76mm)

• Thickness: 1.0 inch (25mm)

Weight with case: • 7.2 ounces (204g)

Reading area: • 2.0 inches (50mm) x 2.5 inches (63mm)

Power supply: • 9 volt battery (Wagner recommends using Alkaline or Lithium non-rechargeable batteries or NiMH rechargeable batteries)

ORION® 930 measurement scales: • Wood moisture content: 4.0% to 32.0% (scale varies slightly depending on the configured species)

• Relative measurement scale: 0-100

Orion 930 measurement scales: • Ambient temperature: 32°F to +110°F (+0°C to +43°C)

• Ambient relative humidity: 0% to 100%

• Equilibrium moisture content measurement scale: 040.7%

• Dew point: -85°F to +110°F (-65°C to +43°C)

• Absolute humidity: 0 to 431.1 lbs/ft (0 to 61.6 kg/m)

Specific gravity scale for wood species: • 0.20-1.0 SG

Storage temperature and humidity: • 50°F to +90°F (+10°C to +32°C), maximum relative humidity 95%, non-condensing

Operating temperature range: +32°F to +110°F (+0°C to +43°C)