ORION® 920

PRODUCT DESCRIPTION:

• Takes surface measurements

• Settings for quick wood species selection

• Damage-free pinless sensor

• Virtually unaffected by temperature

• On-site calibration

• Relative humidity measurement mode

• Press to hold readings

• Programmable alarm

• 7-year warranty

• Rugged protective case and rigid carrying case

  The ORION® wood moisture tester range continues the Wagner tradition of more than 50 years by offering reliable technology for measuring wood moisture without damaging the wood with pins, capable of measuring IN the wood and not ON the wood, in addition to being backed by Wagner's best 7-year industry warranty.

  The ORION® 920 SHALLOW DEPTH PINLESS pinless wood moisture tester is a proven tester useful for water-based finish applicators or floor installers who need to measure thin materials and obtain superior accuracy, versatility and ruggedness from their moisture reading devices. The tester is at its best for reading the moisture of finely sanded surfaces and tells when the wood floor is ready to receive another finish application or to know if the floor has the right moisture level allowing you to install it.

  The ORION® 920 tester has all the basic functions of the 910 and 920, except:

  The ORION® 910 tester is specialized for taking measurements at small depths instead of large depths and does not have IntelliSense™ technology.

  Takes surface measurements

  The ORION® 920 SHALLOW DEPTH PINLESS pinless wood moisture tester offers the possibility of measuring the moisture content from the surface to 1/4" in the wood sample. Particularly useful for checking the moisture content of wood after applying a water-based finish or for checking the moisture content of thin wood planks during floor acclimation.

  The ORION® 920 SHALLOW DEPTH PINLESS pinless wood moisture tester is supplied with:

• 1 x ORION® 920 SHALLOW DEPTH PINLESS pinless moisture tester

• 1 x calibration block dedicated to your moisture tester with the same serial number

• 1 x rubber protective case

• 1 x ABS foam-lined plastic carrying case

• 1 x 9 volt battery

Dimensions with case: • Length: 5.75 inches (146mm)

• Width: 3.0 inches (76mm)

• Thickness: 1.0 inch (25mm)

Weight with case: • 7.2 ounces (204g)

Reading area: • 2.0 inches (50mm) x 2.5 inches (63mm)

Power supply: • 9 volt battery (Wagner recommends using Alkaline or Lithium non-rechargeable batteries or NiMH rechargeable batteries)

Automatic power shutoff: • 60 seconds

Measurement scales: • Wood moisture content: 4.0% to 32.0% (scale varies slightly depending on the configured species)

• Relative measurement scale: 0-100

ORION® 920 measurement scales: • Ambient temperature: 32°F to +110°F (+0°C to +43°C)

• Ambient relative humidity: 0% to 100%

• Equilibrium moisture content measurement scale: 040.7%

• Dew point: -85°F to +110°F (-65°C to +43°C)

• Absolute humidity: 0 to 431.1 lbs/ft (0 to 61.6 kg/m)

Specific gravity scale for wood species: • 0.20-1.0 SG

Storage temperature and humidity: • 50°F to +90°F (+10°C to +32°C), maximum relative humidity 95%, non-condensing

Operating temperature range: • +32°F to +110°F (+0°C to +43°C)